Saturday, March 24, 2012

Also...

I just wanted to thank all of you who have been commenting on the blog.  I really appreciate your kind words and feedback.  Thanks again!

Apology

I'm not dead, I swear!  I can't believe it's been three months since I last updated (I'm also pretty ashamed that Craftmas only ending up lasting three days). *Hangs head in shame*  I am so sorry.  I got sick and then swamped with school and graduate program applications.  As a result, I let this blog fall by the wayside.  The sad thing is, I have been doing some pretty cool crafts these past few months.  I just haven't been blogging about them.  Hopefully, I can rectify this over the next few months.


Stay tuned.

Thursday, December 8, 2011

Bow Tree-topper


Last year my boyfriend's sister and her husband celebrated their first Christmas as a married couple.  They didn't have a tree-topper (unacceptable!), so I offered to make one for them.  And since paper is my preferred medium, I made them a folded paper star.  Cute, but not terribly durable. So, I figured this could be the start of a tradition; each winter I would make the lovely couple a different, disposable tree-topper. 

This year's model was inspired by the paper bow tutorial I mentioned last post. It could easily be adapted to make giant paper bows for any giant presents you may be giving this year. 


Cut wide (1.5-2 in) strips of decorative paper.  I ended up using two 12 x 12 pieces of paper in complementing patterns/colors. However, depending on the size of the topper, you probably won't use up all of the strips. You'll also need to cut out a circle of card stock with a diameter roughly four inches smaller that the size of the  bow that you want (1).  Place glue on the end of a strip of paper, patterned side facing up (2).  Fold over to form a cone (3). Trim off the rest of the paper (4).  Finally, glue the back of the cone to the edge of the card stock circle (5).


Alternate gluing down the different colored cones until you have made a border almost all of the way around the perimeter of the circle (6). In a gap between two of the cones glue a coiled piece of floral wire to the circle. This will be what attaches the star to the tree (7).  To provide some reinforcement, glue a scrap piece of paper over the glued down wire (8).  Continue gluing down cones, still trying to alternate patterns (9 & 10).  It doesn't have to be exact though, bows are often somewhat chaotic and messy.  Finish off the bow with a loop of paper glued to the very center. 

Wednesday, December 7, 2011

Recycled Gift Packaging



If you're anything like me, the holidays aren't just a time for snow and poinsettias and thoughts of dancing sugar plums. They're also a time for junkmail.  And lots of it.  However, thanks to some creative re-imagining over at How About Orange you can turn those piles of catalogs and coupons into gift packaging!

Out of magazine advertisements I made miniature gift bags based on the newspaper gift-bag tutorial and a version of the magazine gift bow. I also adapted the yellow page bow tutorial to make the miniature decorative/magazine paper bows shown below. 


The steps are basically the same, I just used thinner, shorter strips of paper and only four (~ 9 cm) large and two  medium (~ 7.5 cm) sized strips. Fold and glue all of the strips into loops (2 & 3). Then place a dab of glue on the inside of each loop (except the smallest one) and pinch the loops closed (4). 


Glue the loops in an overlapping pattern, start with the four largest (5-7) and continue with the two medium ones (8 & 9). Finish with the smallest loop (10). 

Wouldn't they be just adorable decorating these miniature paper boxes

Saturday, December 3, 2011

Flower Ornaments


Happy Holidays! Here at Paper Pendulum, we are celebrating this season with twelve days of Christmas-themed crafts.  Or Craft-mas if you will. And true to form, the first craft features coffee-filter flowers.


Cut out small four-petaled flowers out of coffee-filters, mine were about nickel-sized (1).  Then, tie a loop of ribbon (2) and bend a length of wire into a "U" shape (3).  Attach the ribbon to a small Styrofoam ball with the wire (4).


Bend small lengths of wire around beads (5).  Pierce the center of the flowers with the wire loop (6) and attach them to the Styrofoam ball (7 & 8). 

And voila, Craft-mas Ornaments!

Sunday, November 6, 2011

Paper Bead Bracelet


A while ago I posted about these paper buttons that I'd recreated from a tutorial seen on Splitcoaststampers.  Unfortunately, I don't often have much of a use for buttons.  Beads, however, I can always find a place for.  The steps are similar, just adapted slightly.


Punch out eight circles from card stock and two circles from decorative or scrap paper (1).  Glue four of the card stock circles and one decorative circle in a stack.  Repeat with the remaining circles (2).  Varnish and age the bead halves.  I mixed a little bit of wood stain in with the varnish to achieve the antique effect (3).  Glue a thin piece of wire to the back of one of the bead halves (4) and glue the halves together.  Clamp the bead until the glue dries (5).  Apply several coats of varnish to the bead and hang to dry (6). Finally, clip off any excess wire and bend it into loops on the side of the finished bead.

Monday, October 31, 2011

Coffee Filter Chinese Lanterns



Happy Halloween!

Look!  A seasonally appropriate post!  Unfortunately, this post doesn't technically fit into the series of coffee-filter flower experiments, since these aren't really flowers. According to Wikipedia, the papery lanterns are actually the plant's fruit.  Regardless, they are charming and feel very 'fall'. 


The lanterns are very easy to make (I think I say this about all of my projects). Cut out four-petaled shapes from coffee-filters (1).  You can experiment with different sizes; I just folded a large coffee filter into fourths and then cut out the rudimentary shape.  Using watercolor paints, color the 'flowers' orange (2).  Allow them to dry.  Pierce a hole in the center of the 'flower' (3).  Next, cut out four 3-3.5 inch sections of thin wire (4).  One inch from the top, wrap the wires together (5).  Wrap this inch in brown floral tape (6).  Insert the taped section through the hole in the 'flower'.


Spread out the four wire sections to line up with the four petals (7). Using masking tape, tape each wire to the middle of each petal (8 & 9).  Trim any excess wire or tape that extends past the end of the petal. Finally, bend the petals downward to form the lantern shape (10).  Attach them in a row to a thick piece of floral wire using more brown floral tape (11).



I hope you enjoy making these and I hope you all have a safe and happy Halloween!